June 11, 2026
Which parameter can I use to adjust the machine compensation error unit in M80 control?
Expert answer
Hello,
The information and the source provided by the AI assistant are correct.
AI answer
In M80 control, the machine compensation unit is adjusted with the #1006 mcmpunit parameter [1]. This parameter is used to select the machine error compensation setting and screen increment [1].
Adjustable values are:
- B: 1 μm
- C: 0.1 μm
- D: 0.01 μm (10nm)
- E: 0.001 μm (1nm)
After adjusting this parameter, the power must be restarted [1].
🤖 This answer was prepared by our AI assistant utilizing content from our website.
Related Sources
- 📖#1006 mcmpunit — Machine error compensation unit(mitsubishi)