MitsubishiM800/M80/E80/C80
#1003 iunit — Input setup unit
CommonEnumPower off/on is required for this parameter change to take effect.
Setting Range
B: 1 μm
C: 0.1 μm
D: 0.01 μm (10nm)
E: 0.001 μm (1nm)
Name
Select the input setting value for each part system and the PLC axis. Increments in parameters will follow this selection.
Values
| Value | Label |
|---|---|
| B | 1 μm |
| C | 0.1 μm |
| D | 0.01 μm (10nm) |
| E | 0.001 μm (1nm) |