MitsubishiM800/M80/E80/C80

#1026 base_I — Base axis I

ChannelStringPower off/on is required for this parameter change to take effect.

Setting Range

Axis names such as X, Y or Z

Name

Set the names of the basic axes that compose the plane. Set the axis name set in "#1013 axname". Normally, when X, Y and Z are specified respectively for base_I, J, K, the following relation will be established: G17: X-Y G18: Z-X G19: Y-Z Or specify any other axis name desired.

Notes

If all three items ("base_I", "base_J" and "base_K") do not need to be set, such as for 2-axis specifications, input "0", and the parameter will be blank.