Back to wizard
F
FanucSeries 0i
ER09 — Alarm ER09 (PMC LABEL CHECK ERROR) Diagnostic Tree
1
Step 1 / 1
Check the NMC parameter (bit 7) setting; if it is '0', turn off the CNC power and turn it back on while holding the 'O' and 'Z' keys on the MDI panel, if it is '1', simply turn the CNC power off and on without pressing any keys. This will clear the PMC nonvolatile memory.
Need professional support or original spare parts?
With 25+ years of CNC industry experience, I provide brand-independent on-site support and original spare parts services.