Back to wizard
M
MitsubishiMDS-E (DRIVE)
3C — ALARM 3C — REGENERATION CIRCUIT ERROR
1
2
3
4
5
Step 1 / 5
Check if a built-in regenerative resistor is used. If so, verify that the short wire is connected between the P and D terminals on the control circuit terminal block. If the wire is missing, disconnected, or the screw is loose, securely reconnect the short wire or replace the connector.
Need professional support or original spare parts?
With 25+ years of CNC industry experience, I provide brand-independent on-site support and original spare parts services.