700023 — Alarm 700023 (Prog. tool pos. number ] max. tool pos. number) Diagnostic Tree

This alarm code (700023) is not found in the uploaded standard Siemens source manuals. The 70xxxx series alarms in the NC/PLC interface are typically machine builder (OEM) specific PLC alarms (the 'Programmed tool position number > max. tool position number' message indicates that a tool or pocket number called in the NC program exceeds the maximum capacity of the turret/magazine). Please check the T codes (tool calls) in the NC program against the maximum number of stations on your machine and correct any invalid tool numbers; if the issue persists, consult the machine manufacturer's documentation.