700031 — Alarm 700031 (Magazine not in spindle pos. or original pos.) Diagnostic Tree

This alarm code (700031) is not found in the uploaded standard Siemens source manuals. The 70xxxx series alarms in the NC/PLC interface are typically machine builder (OEM) specific PLC alarms (the 'Magazine not in spindle pos. or original pos.' message indicates that the tool magazine is stuck between defined positions or its position sensors are failing). Please move the magazine to its original (home) position in manual (JOG) mode, check the magazine position sensors/switches, and consult the machine manufacturer's documentation if the issue persists.